IEI Technology IW04-MB14-N Скачать руководство пользователя

Страница: 54 / 85

AFL2-MF-RFID-KIT Series

Page 44

4.6 Find Tags

The Find tags window enables the query of the RF field for all supported tags. It

continuously sends an Inventory request and displays all the tag labels found within the

read range of the reader. The user can select the appropriate buttons that correspond to

the protocol field.

Figure 4-25:

Once the Run button is clicked, the window shows all tags found within its reception area.

This command runs until the Stop button is clicked (shared location with the Run button).

An indicator for the supported standards is active when the particular protocol is running.

This moving right cursor can be found located left of the Select All button.

This command is recommended for demonstrations, as it requires no specific knowledge

of commands/flags for each protocol.

Содержание IW04-MB14-N






















































































Результаты поиска

Содержание IW04-MB14-N

Отзывы:

Похожие инструкции для IW04-MB14-N

Бренды по названию

Популярные бренды

IEI Technology IW04-MB14-N, Руководство пользователя

Результаты поиска

Содержание IW04-MB14-N

Отзывы:

Похожие инструкции для IW04-MB14-N

Бренды по названию

Популярные бренды