IEI Technology iSignager-LCD-15S Скачать руководство пользователя страница 26

Страница: 26 / 62

iSignager-LCD-S Series Digital Signage Display

Page 18

1.11 Before Start

1.11.1 Choose Mass Storage Device - CF Card or HDD

Before using the iSignager-LCD-S Series, choose either a CF card or a HDD as the mass

storage device for the iSignager-LCD-S Series. Device settings and display content are

saved in the mass storage device. The mass storage device (CF card or HDD) has to be

formatted as

FAT 32

format for initial use.

1.11.2 The Concept of the iSignager AdDesign

The iSignager AdDesign is the software the user can use to design display contents for

the iSignager-LCD-S Series. Two essential components of the display content are the

layout and the sequence. The following descriptions help the user to understand the

concepts of the iSignager AdDesign. For more information please refer to iSignager

AdDesign user manual.

Layout

To design a layout is to arrange what and where the content is displayed. A layout can

contain several display items. Multiple files can be added into each display item. The

display item may include:

Pictures

Crawling

banners

Rolling

banners

video

A digital clock

Sequence

A sequence decides the broadcast sequence and the broadcast time of the created layout.

After creating a layout, the layout must be added into a sequence. A sequence can include

several layouts.

Export Layout/Sequence

To copy the individual layout or sequence to another directory or computer, please use the

“Export Layout/Sequence” function to export the file.

Содержание iSignager-LCD-15S































































Результаты поиска

Содержание iSignager-LCD-15S

Отзывы:

Похожие инструкции для iSignager-LCD-15S

Бренды по названию

Популярные бренды

IEI Technology iSignager-LCD-15S, Руководство пользователя

Результаты поиска

Содержание iSignager-LCD-15S

Отзывы:

Похожие инструкции для iSignager-LCD-15S

Бренды по названию

Популярные бренды