Step 2:
Choose the number of HDD bays and the model of your NAS and click "Start
Now".
Step 3:
Click "Hardware" and follow the on-screen instructions to get hardware ready.
Step 4:
Scroll down to "Install firmware" and click "Local Installation".
Step 5:
Choose your operating system to download, install and run Qfinder.
Step 6:
After installing Qfinder, launch it to search for your NAS. Double click on your
NAS in Qfinder to start the Smart Installation Guide. Follow the on-screen
instructions to the built-in Qfinder Setup Wizard will guide you along the way to
complete the firmware installation.
Step 7:
Proceed to log into QTS with your QTS account username and password to log
in (QTS is the operating system for the Turbo NAS.)
3.10 Cloud Installation
Follow the steps in this section to complete cloud installation for your NAS:
Step 1:
Connect your NAS to the Internet, and on your PC, go to "start.qnap.com" and
scroll down until the "Install firmware" section. Click "Cloud Installation" and in
the "Start Cloud Installation" step, click the "Start Cloud Installation" button.
Alternatively, you may scan the QR code using your mobile phone to start cloud
installation.
Step 2:
Enter the cloud key (cloud key can be found from the sticker on top of your NAS)
and click "Enter". Before proceeding to Step 4, activate your myQNAPcloud
account after your account registration is confirmed (an email will be sent to the
email address provided to create your myQNAPcloud account, and the account
