IEI Technology IQ7-US15W Скачать руководство пользователя страница 14

Страница: 14 / 139

IQ7 Design Guide

Page 2

1.1 IQ7-US15W

Figure 1-1: IQ7-US15W IQ7 Design Guide

The IQ7-US15W is a QSeven CPU Module with a 1.1 GHz Intel® Atom™ Z510 or

1.6 GHz Intel® Atom™ Z530 CPU.

The IQ7-US15W is designed for applications that require fanless operation. The low

power CPUs don't require active cooling and stay within specified heat range using the

included cooling solution.

As part of the QSeven standard, an API software interface is defined for the embedded

features such as a watchdog timer, I²C bus, LCD backlight control, BIOS user storage

area and temperature control.

Graphics capabilities include SDVO and 18/24-bit LVDS to the baseboard.

Other interfaces include IDE, USB and HD Audio.

1.2 Benefits

Some of the IQ7-US15W motherboard benefits include,

Low power consumption

Wide range of I/O interfaces

Содержание IQ7-US15W












































































































































Результаты поиска

Содержание IQ7-US15W

Отзывы:

IEI Technology IQ7-US15W, Руководство пользователя, Страница: 14 / 139

Результаты поиска

Содержание IQ7-US15W

Отзывы: