IEI Technology IOWA-MARK-533-128MB-R10 Скачать руководство пользователя страница 200

Страница: 200 / 216

Page 184

IOWA-MARK Half-size CPU Card

F.1 Introduction

The ALi M5283 SATA RAID chipset can control parallel ATA (PATA) and serial ATA

(SATA) disks. The ALi controller supports PATA UDMA transfer mode up to mode 6 and

SATA 1 disk drives. The ALi M5283 also has a cost-effective RAID functionality that can

increase the data read/write speed and provide protection to data by distributing mirrored

duplicates of data onto two disk drives (RAID 1).

CAUTION:

A configured RAID volume (which may consist of multiple hard drives)

appears to an operating system as a contingent storage space. The

operating system will not be able to distinguish the physical disk drives

contained in a RAID configuration.

F.1.1 Precautions

One key benefit a RAID configuration brings is that a single hard drive can fail within a

RAID array without damaging data. With RAID1 array, a failed drive can be replaced and

the RAID configuration restored.

WARNING:

Irrecoverable data loss occurs if a working drive is removed when

trying to remove a failed drive. It is strongly recommended to mark the

physical connections of all SATA disk drives. Drive locations can be

identified by attaching stickers to the drive bays. If a drive member of a

RAID array should fail, the failed drive can then be correctly identified.

Содержание IOWA-MARK-533-128MB-R10

























































































































































































































Результаты поиска

Содержание IOWA-MARK-533-128MB-R10

Отзывы:

IEI Technology IOWA-MARK-533-128MB-R10, Руководство пользователя, Страница: 200 / 216

Результаты поиска

Содержание IOWA-MARK-533-128MB-R10

Отзывы: