IEI Technology IOWA-GX Скачать руководство пользователя страница 95

Страница: 95 / 212

IOWA-GX CPU Board

Page 77

5.6.2 Backplane Installation

Before the IOWA-GX can be installed into the chassis, a backplane must first be installed.

Please refer to the installation instructions that came with the backplane and the chassis

to see how to install the backplane into the chassis.

NOTE:

IEI has a wide range of backplanes available. Please contact your

IOWA-GX vendor, reseller or an IEI sales representative at

[email protected]

or visit the IEI website (

http://www.ieiworld.com.tw

)

to find out more about the available chassis.

5.6.3 CPU Card Installation

To install the IOWA-GX CPU card onto the backplane, carefully align the CPU card

interface connectors with the corresponding socket on the backplane. To do this, please

refer to the reference material that came with the backplane. Next, secure the CPU card to

the chassis. To do this, please refer to the reference material that came with the chassis.

Содержание IOWA-GX





















































































































































































































Результаты поиска

Содержание IOWA-GX

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology IOWA-GX, Руководство пользователя

Результаты поиска

Содержание IOWA-GX

Отзывы:

Бренды по названию

Популярные бренды