IEI Technology IOWA-8522 Скачать руководство пользователя страница 44

Страница: 44 / 244

IOWA-8522 Motherboard

Page 24

2.7.2.2 Infrared

The onboard Super I/O supports the following infrared specifications:

IrDA version 1.0 SIR protocol with a maximum baud rate up to 115.2Kbps

The IR controller on the super I/O is interfaced through the IrDA pin-header

Figure 2-14: Infrared

2.7.2.3 Hardware Monitor Functions

The Super I/O Hardware Monitor monitors internal voltages, system temperature and the

cooling fan speed. All the monitored environmental parameters can be read from the

BIOS Hardware Health Configuration menu.

2.7.2.4 Parallel Port

The Super I/O parallel port (LPT) is compatible with the following LPT specifications.

IBM parallel port compatible

PS/2 compatible bi-directional parallel port

Enhanced Parallel Port (EPP) mode supported. Compatible with IEEE 1284

specifications

Extended Parallel Port (EPP) mode supported. Compatible with IEEE 1284

specifications

Enhanced printer port back-drive current protection

Содержание IOWA-8522





















































































































































































































































Результаты поиска

Содержание IOWA-8522

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology IOWA-8522, Руководство пользователя

Результаты поиска

Содержание IOWA-8522

Отзывы:

Бренды по названию

Популярные бренды