IEI Technology IOBA-10F-AD, Руководство пользователя, Страница: 23 / 65

IOBA-10F-AD RISC-based Panel PC
Page 13
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
IOBA-10F-AD may result in permanent damage to the IOBA-10F-AD
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the IOBA-10F-AD. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the IOBA-10F-AD is accessed internally, or any other electrical
component is handled, the following anti-static precautions are strictly adhered to.

Wear an anti-static wristband : - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding : - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad : - When configuring the IOBA-10F-AD, place it on an
anti-static pad. This reduces the possibility of ESD damaging the IOBA-10F-AD.

Only handle the edges of the PCB : - When handling the PCB, hold the PCB
by the edges.
3.2 Installation Precautions
When installing the flat panel PC, please follow the precautions listed below:

Power turned off : When installing the flat panel PC, make sure the power is
off. Failing to turn off the power may cause severe injury to the body and/or
damage to the system.

Certified Engineers : Only certified engineers should install and modify
onboard functionalities.

Anti-static Discharge : If a user open the rear panel of the flat panel PC, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.