IEI Technology IMBA-X9654 Скачать руководство пользователя страница 20

Страница: 20 / 266

IMBA-X9654 ATX Motherboard

Page 2

1.1 Overview

The IMBA-X9654 ATX form factor motherboard is a LGA775 Intel® Core™2 Quad,

Core™2 Duo, Pentium® D, Pentium® 4 or Celeron® D platform with a 533MHz, 800MHz

or 1066MHz front side bus (FSB). Up to 8GB of DDR2 SDRAM and up to six SATA II hard

disk drives (HDD) are supported. High-performance PCI Express (PCIe) Gigabit Ethernet

(GbE) connectivity is integrated into the system. One PCIe x16, three PCIe x4 slots, three

PCI slots and eight USB 2.0 connectors (four external and four internal) provide flexible

expansion options. Added system security is provided with Trusted Platform Module (TPM

v1.2) supported.

1.1.1 IMBA-X9654 Features

Some of the IMBA-X9654 features are listed below.

Supports LGA775 Intel® CPUs including:

Intel® Core™2 Quad

Intel® Core™2 Duo

Intel® Pentium® D

Intel® Pentium® 4

Intel® Celeron® D

Maximum FSB of 1066MHz

Supports four 240-pin 533MHz, 667MHz or 800MHz 2GB DDR2 memory

modules

Added security with support for TPM v1.2

Expansion slots include:

One PCIe x16 slots

Three PCIe x4 slots

Three PCI slots

Six SATA II drives with transfer rates of 3.0Gb/s supported

Four Ultra ATA 100, Ultra ATA 66 or Ultra ATA 33 IDE HDDs supported

Eight USB 2.0 devices supported

Dual PCIe GbE Ethernet connectors

PICMG 1.3 form factor

RoHS compliant

Содержание IMBA-X9654











































































































































































































































































Результаты поиска

Содержание IMBA-X9654

Отзывы:

IEI Technology IMBA-X9654, Руководство пользователя, Страница: 20 / 266

Результаты поиска

Содержание IMBA-X9654

Отзывы: