IEI Technology IMBA-X9654 Скачать руководство пользователя страница 163

Страница: 163 / 266

IMBA-X9654 ATX Motherboard

Page 145

On/Off

(Default)

When the power button is pressed the system is either

turned on or off

Suspend

When the power button is pressed the system goes into

suspend mode

Restore on AC Power Loss [Power Off]

Use the

Restore on AC Power Loss

BIOS option to specify what state the system returns

to if there is a sudden loss of power to the system.

Power Off

(Default)

The system remains turned off

Power On

The system turns on

Last State

The system returns to its previous state. If it was on, it

turns itself on. If it was off, it remains off.

Resume on Ring [Disabled]

Use the

Resume on Ring

BIOS option to enable activity on the RI (ring in) modem line to

rouse the system from a suspend or standby state. That is, the system will be roused by

an incoming call on a modem.

Disabled

(Default)

Wake event not generated by an incoming call

Enabled

Wake event generated by an incoming call

Resume on PME# [Disabled]

Use the

Resume on PME#

BIOS option to enable activity on the PCI PME (power

management event) controller to rouse the system from a suspend or standby state.

Disabled

(Default)

Wake event not generated by PCI PME controller

activity

Содержание IMBA-X9654











































































































































































































































































Результаты поиска

Содержание IMBA-X9654

Отзывы:

IEI Technology IMBA-X9654, Руководство пользователя, Страница: 163 / 266

Результаты поиска

Содержание IMBA-X9654

Отзывы: