IEI Technology imba-30104 Скачать руководство пользователя страница 124

Страница: 124 / 185

IMBA-30104 ATX Motherboard

Page 110

Enabled

OEM Logo displayed instead of POST messages

AddOn ROM Display Mode [Force BIOS]

The

AddOn ROM Display Mode

option allows add-on ROM (read-only memory)

messages to be displayed.

Force BIOS

EFAULT

Allows the computer system to force a third party

BIOS to display during system boot.

Keep Current

Allows the computer system to display the

information during system boot.

Bootup Num-Lock [Off]

The

Bootup Num-Lock

BIOS option allows the Number Lock setting to be modified

during boot up.

Off D

EFAULT

Does not enable the keyboard Number Lock automatically. To

use the 10-keys on the keyboard, press the Number Lock key

located on the upper left-hand corner of the 10-key pad. The

Number Lock LED on the keyboard lights up when the Number

Lock is engaged.

Allows the Number Lock on the keyboard to be enabled

automatically when the computer system boots up. This allows

the immediate use of the 10-key numeric keypad located on

the right side of the keyboard. To confirm this, the Number

Lock LED light on the keyboard is lit.

Boot From LAN Support [Disabled]

The

BOOT From LAN Support

option enables the system to be booted from a remote

system.

Disabled D

EFAULT

Cannot be booted from a remote system through the

LAN

Содержание imba-30104


























































































































































































Результаты поиска

Содержание imba-30104

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology imba-30104, Руководство пользователя

Результаты поиска

Содержание imba-30104

Отзывы:

Бренды по названию

Популярные бренды