IEI Technology ICEROCK3-T10, Руководство пользователя

Страница: 33 / 129

ICEROCK3-T10 Tablet PC
Page 21
3.4 SIM Card Installation (Optional)
This section covers the installation of a SIM card for mobile network connections on the
ICEROCK3-T10 models with optional mobile 3.75G module.
Step 1:
Open the I/O cover on the side panel. Locate the SIM card slot.
Step 2:
Install the SIM card in the slot indicated below.
Figure 3-8: SIM Card Installation
Step 3:
Replace the I/O cover.
S te p 0 :
3.5 Using RFID Reader
There is a RFID reader on the front panel. To use the RFID reader, follow the steps below.
Step 1:
Check the RFID status indicator on the front panel to make sure the RFID
function is enabled (see
Section 1.4.1
). The RFID function is enabled by default
in the BIOS menu. If the RFID reader is disabled, please go to
Chipset

PCH-IO Configuration
BIOS menu to enable it (refer to
Section 5.4.1
).
Step 2:
Follow the instruction described in
Section 4.7
to install the RFID driver.
Step 3:
Double click the
PcscTool
icon in the RFID folder in the driver CD.