IEI Technology ICEFIRE-T10A Скачать руководство пользователя страница 116

Страница: 116 / 149

ICEFIRE-T10A Mobile Clinic Assistant

Page 102

NOTE:

Use the following commands to check if the partitions were created

successfully.

Step 6:

Press any key to exit the recovery tool and automatically reboot the system.

Please continue to the following procedure: Build-up Recovery Partition.

B.2.3 Install Operating System, Drivers and Applications

Install the operating system onto the unlabelled partition. The partition labeled as

"Recovery" is for use by the system recovery tool and should not be used for installing the

operating system or any applications.

NOTE:

The operating system installation program may offer to reformat the

chosen partition. DO NOT format the partition again. The partition has

already been formatted and is ready for installing the new operating

system.

To install the operating system, insert the operating system installation CD into the optical

drive. Restart the computer and follow the installation instructions.

Содержание ICEFIRE-T10A






















































































































































Результаты поиска

Содержание ICEFIRE-T10A

Отзывы:

Похожие инструкции для ICEFIRE-T10A

Бренды по названию

Популярные бренды

IEI Technology ICEFIRE-T10A, Руководство пользователя

Результаты поиска

Содержание ICEFIRE-T10A

Отзывы:

Похожие инструкции для ICEFIRE-T10A

Бренды по названию

Популярные бренды