IEI Technology IBM-Q670 Скачать руководство пользователя страница 69

Страница: 69 / 184

IMB-Q670 Micro-ATX Motherboard

Page 55

4.2.2 Socket LGA1155 Cooling Kit Installation

WARNING:

DO NOT attempt to install a push-pin cooling fan.

The pre-installed support bracket prevents the board from

bending and is ONLY compatible with captive screw type cooling

fans.

The cooling kit can be bought from IEI. The cooling kit has a heatsink and fan.

WARNING:

Do not wipe off (accidentally or otherwise) the pre-sprayed layer of

thermal paste on the bottom of the heat sink. The thermal paste

between the CPU and the heat sink is important for optimum heat

dissipation.

To install the cooling kit, follow the instructions below.

Step 1:

A cooling kit bracket is pre-installed on the solder side of the mainboard.

Step 2:

Place the cooling kit onto the socket LGA1155 CPU

. Make sure the CPU

cable can be properly routed when the cooling kit is installed.

Step 3:

Mount the cooling kit

. Gently place the cooling kit on top of the CPU. Make

sure the four threaded screws on the corners of the cooling kit properly pass

through the holes of the cooling kit bracket.

Step 4:

Secure the cooling kit

by fastening the four retention screws of the cooling kit.

Содержание IBM-Q670

























































































































































































Результаты поиска

Содержание IBM-Q670

Отзывы:

IEI Technology IBM-Q670, Руководство пользователя, Страница: 69 / 184

Результаты поиска

Содержание IBM-Q670

Отзывы: