IEI Technology HDC-502E, Руководство пользователя, Страница: 20 / 40

HDC-502E Video Capture Card
Page 13
3.1 Overview
A CD is shipped with the video capture card. The CD contains a driver for the video
capture controllers on the card. When the video capture card is installed on the system,
the driver must be installed. Failure to install the driver means that the video capture card
cannot be detected by the system.
NOTE:
The Found New Hardware Wizard will automatically start when the
system detects the video capture card. Click Cancel to exit the wizard
and follow the steps described in this chapter to install the driver and
the HDCapture demo program.
3.2 Driver Installation
To install the HDC-502E driver, please follow the steps below. If the HDC-502E driver is
already installed, please refer to Section 3.2.2 to uninstall the driver first.
NOTE:
If the User Access Control dialog box appears during installation,
click Yes to continue.
Step 1: Make sure to log in the system as the administrator.
Step 2: Insert the driver CD.
Step 3: Locate the “Driverinstaller.bat” file in the driver CD. Double click it. The console
window appears and starts to install all drivers.
Step 4: The screen in Figure 3-1 appears. Click Install .