IEI Technology HDC-301EL-R10, Руководство пользователя

Страница: 18 / 41

HDC-301EL Video/Audio Capture Card
Page 11
2.2 Installation Considerations
NOTE:
The following installation notices and installation considerations should
be read and understood before installation. All installation notices must
be strictly adhered to. Failing to adhere to these precautions may lead
to severe damage and injury to the person performing the installation.
WARNING:
The installation instructions described in this manual should be
carefully followed in order to prevent damage to the components and
injury to the user.
Before and during the installation please DO the following:
ƒ
Read the user manual:
o
The user manual provides a complete description of the HDC-301EL
installation instructions and configuration options.
ƒ
Wear an electrostatic discharge cuff (ESD):
o
Electronic components are easily damaged by ESD. Wearing an ESD cuff
removes ESD from the body and helps prevent ESD damage.
ƒ
Place the HDC-301EL on an anti-static pad:
o
When installing or configuring the motherboard, place it on an anti-static
pad. This helps to prevent potential ESD damage.
ƒ
Turn all power to the HDC-301EL off:
o
When working with the HDC-301EL, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the system.
Before and during the installation of the HDC-301EL, DO NOT:
ƒ
Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.