IEI Technology FLEX-BX200-Q370 Скачать руководство пользователя страница 110

Страница: 110 / 153

FLEX-BX200-Q370

Page 92

Step 4:

Plug the system into a monitor and check to see if anything appears on the

screen. If the boot-up screen appears it means the power LED has failed. To fix

this problem, contact an IEI sales representative directly.

Step 0:

5.2.2 The System Doesn’t Boot Up

If the system doesn’t boot up please do the following:

Step 1:

Check the power is turned on. See Section 5.2.1 above.

Step 2:

Make sure the SO-DIMM modules are properly installed.

Step 0:

5.2.3 More Troubleshooting

Nothing appears on the monitor after booting up the system

: Make sure the monitor

is properly connected to the system and the monitor is connected to a power supply and

turned on.

WARNING!

If all troubleshooting measures have been taken and the system still

fails to start, contact the IEI reseller or vendor you purchased the

FLEX-BX200-Q370 from or contact an IEI sales representative directly.

To contact an IEI sales representative, please send an email

[email protected]

Содержание FLEX-BX200-Q370


























































































































































Результаты поиска

Содержание FLEX-BX200-Q370

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology FLEX-BX200-Q370, Руководство пользователя

Результаты поиска

Содержание FLEX-BX200-Q370

Отзывы:

Бренды по названию

Популярные бренды