IEI Technology EP-308A, Руководство пользователя

Страница: 58 / 102

EP-308A POS
Page 48
ƒ
Remote Access [Disabled]
Use the
Remote Access
option to enable or disable access to the remote functionalities
of the system.
Î
Disabled D
EFAULT
Remote access is disabled.
Î
Enabled
Remote access configuration options shown below
appear:
Serial Port Number
Serial Port Mode
Flow Control
Redirection after BIOS POST
Terminal Type
VT-UTF8 Combo Key Support
These configuration options are discussed below.
ƒ
Serial Port Number [COM1]
Use the
Serial Port Number
option allows to select the serial port used for remote
access.
Î
COM1 D
EFAULT
System is remotely accessed through COM1
Î
COM2
System is remotely accessed through COM2
NOTE
: Make sure the selected COM port is enabled through the Super I/O configuration
menu.
ƒ
Base Address, IRQ [2F8h,3]
The
Base Address, IRQ
option cannot be configured and only shows the interrupt
address of the serial port listed above.
ƒ
Serial Port Mode [115200 8,n,1]
Use the
Serial Port Mode
option to select baud rate through which the console redirection
is made. The following configuration options are available