IEI Technology ECN-360A-ULT3, Руководство пользователя

Страница: 29 / 131

E C N-360A-ULT3 E mbedded S ys tem
P age 16
Figure 3-4: SO-DIMM Socket
S tep 3:
Align the SO-DIMM with the socket. The SO-DIMM must be oriented in such a
way that the notch in the middle of the SO-DIMM must be aligned with the
plastic bridge in the socket ( Figure 3-5 ).
S tep 4:
Push the SO-DIMM into the socket at an angle ( Figure 3-5 ).
Figure 3-5: SO-DIMM Installation
S tep 5:
Gently pull the arms of the SO-DIMM socket out and push the rear of the
SO-DIMM down ( Figure 3-5 ).
S tep 6:
Release the arms on the SO-DIMM socket. They clip into place and secure the
SO-DIMM in the socket.