IEI Technology ECN-360A-HM65, Руководство пользователя

Страница: 26 / 154

ECN-360A-HM65 Em b e d d e d S ys te m
P a g e 13
3.1 In s ta lla tio n P re c a u tio n s
During installation, be aware of the precautions below:

Read the user manual : The user manual provides a complete description of
the ECN-360A-HM65, installation instructions and configuration options.

DANGER! Disconnect Power : Power to the ECN-360A-HM65 must be
disconnected during the installation process, or before any attempt is made to
access the rear panel. Electric shock and personal injury might occur if the
rear panel of the ECN-360A-HM65 is opened while the power cord is still
connected to an electrical outlet.

Qualified Personnel : The ECN-360A-HM65 must be installed and operated
only by trained and qualified personnel. Maintenance, upgrades, or repairs
may only be carried out by qualified personnel who are familiar with the
associated dangers.

Grounding : The ECN-360A-HM65 should be properly grounded. The voltage
feeds must not be overloaded. Adjust the cabling and provide external
overcharge protection per the electrical values indicated on the label attached
to the back of the ECN-360A-HM65.
3.2 In s ta lla tio n a n d Co n fig u ra tio n S te ps
The following installation steps must be followed.
S te p 1: Unpack the ECN-360A-HM65.
S te p 2: Install the HDD.
S te p 3:
Install the Wi-Fi antenna (Wi-Fi model only).
S te p 4: Configure the system.
S te p 5:
Connect peripheral devices to the ECN-360A-HM65.
S te p 6:
Mount the ECN-360A-HM65.
S te p 0:
3.3 Ha rd Dis k Drive (HDD) In s ta lla tio n
To install the hard drive, please follow the steps below: