IEI Technology ECK-3699GH Скачать руководство пользователя страница 91

Страница: 91 / 181

ECK-3699GH Embedded System

ACPI Version Features [ACPI v2.0]

Use the

ACPI Version Features

option to enable the ACPI

(Advanced Configuration and

Power Interface) features. By enabling this feature the system RSDP (Root System

Description Pointer) is able to obtain physical addresses for other 64-bit fixed system

description tables.

ACPI v2.0

EFAULT

ACPI version 2.0 is enabled.

ACPI APIC Support [Enabled]

Use the

ACPI APIC Support

option to add a pointer to an ACPI APIC table in the RSDT

(Root System Description Table). The RSDT is an array of pointers that direct the system

to the physical addresses of other description tables. The RSDT is the main ACPI table.

The RSDP is located in low memory space of the system and provides the physical

address of the RSDT. The RSDT itself is identified in memory because it starts with the

signature "RSDT."

Disabled

Pointers to the APIC APIC table are not be provided in the

RSDT

Enabled D

EFAULT

Pointers to the APIC APIC table are provided in the RSDT

5.3.7 MPS Configuration

Use the

MPS Configuration

menu (

BIOS Menu 11

) to select `he multi-processor table.

Page 91

Содержание ECK-3699GH






















































































































































































Результаты поиска

Содержание ECK-3699GH

Отзывы:

IEI Technology ECK-3699GH, Руководство пользователя, Страница: 91 / 181

Результаты поиска

Содержание ECK-3699GH

Отзывы: