IEI Technology ECK-161B Скачать руководство пользователя

Страница: 89 / 135

ECK-161B Embedded System

Page 75

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product and

is subject to change without prior notice. Visit the IEI website or contact

technical support for the latest updates.

The ECK-161B embedded system has the following software drivers:

Intel Chipset Driver Installation

VGA Utilities Driver

LAN Driver (for GbE LAN) Installation

RealTek Audio Driver (ALC883) Installation

SATA Driver Installation

All drivers can be found on the CD that came with the motherboard. To install the drivers

please follow the instructions in the sections below.

6.2 Chipset Driver Installation

To install the chipset driver, please follow the steps below:

Step 1:

Insert the CD into the system that contains the ECK-161B embedded system.

Open the

1-INF

directory and locate the icon for the

infinst_autol.exe

installation file. Once located, use the mouse to double click the icon.

Step 2:

The “InstallShield Wizard Preparation Screen” in

Figure 6-1

appears.

Содержание ECK-161B








































































































































Результаты поиска

Содержание ECK-161B

Отзывы:

Похожие инструкции для ECK-161B

Бренды по названию

Популярные бренды

IEI Technology ECK-161B, Руководство пользователя

Результаты поиска

Содержание ECK-161B

Отзывы:

Похожие инструкции для ECK-161B

Бренды по названию

Популярные бренды