IEI Technology DRPC-242-ADL-P Series, Руководство пользователя

Страница: 42 / 167

DRPC-242-ADL-P
Page 26
Figure 3-14: Knock out the reserved holes
3.8 Expansion Chassis Installation (Optional)
The DRPC-242-ADL-P provides an option for adding PCIe x4 function, which is achieved
by installing the expansion chassis (P/N: TXC-DRPC-240-1S-R10). The installation steps
are described below.
Step 1:
Before installing the expansion chassis, ensure the fan wire inside the system
will not be pressed or damaged (adjust the wiring if necessary). Align the riser
card on the expansion chassis with the PCIe x4 slot inside the DRPC-242.
Step 2:
Once aligned, insert the riser card into the PCIe slot. Secure the expansion
chassis with 8 screws.
Step 3:
To install an expansion card, open the cover on the top cover of the expansion
chassis by removing 6 screws. Remove the blank bracket and install the PCIe
card. Reinstall the bracket screw and the top cover after installing the card
( Figure 3-15 ).