IEI Technology DRPC-230-ULT5 Series Скачать руководство пользователя страница 104

Страница: 104 / 117

DRPC-230-ULT5 Embedded System

Page 94

B.1.2 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the installation of the

DRPC-230-ULT5 may result in permanent damage to the

DRPC-230-ULT5 and severe injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the DRPC-230-ULT5. Dry climates are especially susceptible to ESD. It is

therefore critical that whenever the DRPC-230-ULT5 is opened and any of the electrical

components are handled, the following anti-static precautions are strictly adhered to.



Wear an anti-static wristband

: Wearing a simple anti-static wristband can

help to prevent ESD from damaging any electrical component.



Self-grounding

: Before handling any electrical component, touch any

grounded conducting material. During the time the electrical component is

handled, frequently touch any conducting materials that are connected to the

ground.



Use an anti-static pad

: When configuring or working with an electrical

component, place it on an anti-static pad. This reduces the possibility of ESD

damage.



Only handle the edges of the electrical component

: When handling the

electrical component, hold the electrical component by its edges.

B.1.3 Explanation of Graphical Symbols

This symbol warns the user that the part has this symbol is hot. Therefore, it is

dangerous to make any kind of contact with this part.

This symbol alerts the user that important information concerning the operation

and maintenance of this unit has been included. Therefore, the information

should be read carefully in order to avoid any problems.

Содержание DRPC-230-ULT5 Series






















































































































Результаты поиска

Содержание DRPC-230-ULT5 Series

Отзывы:

Похожие инструкции для DRPC-230-ULT5 Series

Бренды по названию

Популярные бренды

IEI Technology DRPC-230-ULT5 Series, Руководство пользователя

Результаты поиска

Содержание DRPC-230-ULT5 Series

Отзывы:

Похожие инструкции для DRPC-230-ULT5 Series

Бренды по названию

Популярные бренды