IEI Technology DRPC-120-BT, Руководство пользователя, Страница: 92 / 121

DRPC-120-BTi Embedded System
Page 80
the indicated page number. When writing an image into the OLED module, the
OLED Status field displays “The page is under writing. Please wait…”. Please
be patient and wait for several seconds. When finished, “Write Page Done” is
displayed.

Display
:
Clicks to show the corresponding image on the OLED display according to the
indicated page number.

Clear Screen
:
Clicks to clear the OLED screen.
6.2.5 OLED Erase Page
The OLED Erase Page allows users to erase the images in the indicated page numbers.
The range of page number is 0 ~ 511. Please note that the
Start PAGE
must be smaller
than the
End Page
.
Figure 6-8: OLED Erase Page
When the page number range is set, click
Erase
. A warning message will appear to
remind users the estimated time. Click
Yes
to continue. The OLED Status field will display
the erasing status.
To erase all images, set the page number from 0 to 511.