IEI Technology DRPC-120-BT, Руководство пользователя

Страница: 116 / 121

DRPC-120-BTi Embedded System
Page 104
B.1 Introduction
The DIO connector on the DRPC-120-BTi is interfaced to GPIO ports on the Super I/O
chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs. The digital inputs
and digital outputs are generally control signals that control the on/off circuit of external
devices or TTL devices. Data can be read or written to the selected address to enable the
DIO functions.
NOTE:
For further information, please refer to the datasheet for the Super I/O
chipset.
The BIOS interrupt call
INT 15H
controls the digital I/O.
INT 15H:
AH – 6FH
Sub-function:
AL – 8
:Set the digital port as INPUT
AL :Digital I/O input value