IEI Technology DRPC-120-BT, Руководство пользователя

Страница: 111 / 121

DRPC-120-BTi Embedded System
Page 99
A.1 Safety Precautions
WARNING:
The precautions outlined in this appendix should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the DRPC-120-BTi.
Please follow the safety precautions outlined in the sections that follow:
A.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.

Make sure the power is turned off and the power cord is disconnected
when moving, installing or modifying the system.

Do not apply voltage levels that exceed the specified voltage range
.
Doing so may cause fire and/or an electrical shock.

Electric shocks can occur
if opened while still powered on.

Do not drop or insert any objects
into the ventilation openings.

If considerable amounts of dust, water, or fluids enter the system
, turn
off the power supply immediately, unplug the power cord, and contact the
system vendor.

DO NOT
:
o Drop the system against a hard surface.
o Strike or exert excessive force onto the LCD panel.
o Touch any of the LCD panels with a sharp object
o In a site where the ambient temperature exceeds the rated temperature