IEI Technology DM series, Руководство пользователя, Страница: 81 / 128

DM Series Monitor
Page 67
Step 1:
Attach the DIN rail mounting bracket to the rear of the monitor. Secure the
bracket to the monitor with the supplied retention screws (
5
Figure 5-23
).
Figure 5-23: DIN Rail Mounting Bracket
Step 2:
Make sure the inserted screw in the center of the bracket is at the lowest
position of the elongated hole (
5
Figure 5-24
).
Figure 5-24: Screw Locations
Step 3:
Place the DIN rail flush against the back of the mounting bracket making sure
the edges of the rail are between the upper and lower clamps (
5
Figure 5-25
).