IEI Technology AFOKAR-08A, Руководство пользователя

Страница: 54 / 60

AFOKAR-08A-RK39
Page 46

If considerable amounts of dust, water, or fluids enter the device , turn off
the power supply immediately, unplug the power cord, and contact the
AFOKAR-08A-RK39 vendor.

DO NOT :
o
Drop the device against a hard surface.
o
Strike or exert excessive force onto the LCD panel.
o
Touch any of the LCD panels with a sharp object
o
In a site where the ambient temperature exceeds the rated temperature
B.1.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
AFOKAR-08A-RK39 may result in permanent damage to the
AFOKAR-08A-RK39 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFOKAR-08A-RK39. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the AFOKAR-08A-RK39 is opened and any of the
electrical components are handled, the following anti-static precautions are strictly
adhered to.

Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging any electrical component.

Self-grounding : Before handling any electrical component, touch any
grounded conducting material. During the time the electrical component is
handled, frequently touch any conducting materials that are connected to the
ground.

Use an anti-static pad : When configuring or working with an electrical
component, place it on an anti-static pad. This reduces the possibility of ESD
damage.

Only handle the edges of the electrical component : When handling the
electrical component, hold the electrical component by its edges.