IEI Technology AFL3-W07A-BT-N1, Руководство пользователя

Страница: 34 / 109

AFL3-W07A-BT-N1 Panel PC
Page 22
3.7.1 Wall Mounting
To mount the flat bezel panel PC onto the wall, please follow the steps below.
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four screw holes in the bracket on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (
4
Figure 3-9 ).
Figure 3-9: Wall-mounting Bracket