IEI Technology AFL3-W07A-AL, Руководство пользователя

Страница: 83 / 114

AFL3-W07A-AL Panel PC
Page 71
Figure 5-2: WLAN Card Location
Step 5: Disconnect the antenna cables on the WLAN module and remove the retention
screw to release the WLAN card.
Step 6:
Grasp the WLAN card by the edges and carefully pull it out of the socket.
Step 7: Install a new WLAN card by inserting the card into the slot at an angle.
Step 8: Push the WLAN card down and secure it with the previously removed retention
screw.
Step 9: Connect the antenna cables.
Step 10: Replace the back cover and secure it using the previously removed retention
screws. Step 0:
5.6 Reinstalling the Cover
WARNING:
Failing to reinstall the cover may result in permanent damage to the
system. Please make sure all coverings are properly installed.
When maintenance procedures are complete, please make sure the plastic back cover is
replaced.