IEI Technology AFL2-W19A-H61 Series, Руководство пользователя

Страница: 137 / 279

AFL2-W19A/AB-H61
P a g e 117
7.1 S ys te m Ma in te n a n c e In tro d u c tio n
If the components of the AFL2-W19A/AB-H61 fail they must be replaced. Components
that can be replaced include:

SO-DIMM module

WLAN module
Please contact the system reseller or vendor to purchase the replacement parts. Back
cover removal instructions for the AFL2-W19A/AB-H61 are described below.
7.2 An ti-s ta tic P re c a u tio n s
WARNING:
Failure to take ESD precautions during the maintenance of the
AFL2-W19A/AB-H61 may result in permanent damage to the
AFL2-W19A/AB-H61 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL2-W19A/AB-H61. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the AFL2-W19A/AB-H61 is accessed internally, or any
other electrical component is handled, the following anti-static precautions are strictly
adhered to.

Wear an anti-static wristband : - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding : - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad : - When configuring the AFL2-W19A/AB-H61, place it
on an antic-static pad. This reduces the possibility of ESD damaging the
AFL2-W19A/AB-H61.

Only handle the edges of the PCB : - When handling the PCB, hold the PCB
by the edges.