IEI Technology AFL-xxA-N270 series Скачать руководство пользователя страница 5

Страница: 5 / 171

AFL-xxA-N270 Series Panel PC

Page V

WARNING:

This equipment has been tested and found to comply with the limits for a Class A and

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that any change or modifications to the equipment not expressly

approve by the party responsible for compliance could void your authority to operate

such equipment.

Содержание AFL-xxA-N270 series












































































































































































Результаты поиска

Содержание AFL-xxA-N270 series

Отзывы:

IEI Technology AFL-xxA-N270 series, Руководство пользователя, Страница: 5 / 171

Результаты поиска

Содержание AFL-xxA-N270 series

Отзывы: