IEI Technology AFL-W15A-GM45, Руководство пользователя

Страница: 60 / 148

AFL-W15A/17D-GM45 Panel PC
Page 49
Î
30 Sec
POST waits 30 seconds for the USB mass storage
device after the start unit command.
Î
40 Sec
POST waits 40 seconds for the USB mass storage
device after the start unit command.
Î
Device ##
The
Device##
field lists the USB devices that are connected to the system.
Î
Emulation Type [Auto]
Use the
Emulation Type
BIOS option to specify the type of emulation BIOS has to
provide for the USB device.
Î
Auto D
EFAULT
BIOS auto-detects the current USB.
Î
Floppy
The USB device will be emulated as a floppy drive.
The device can be either A: or B: responding to
INT13h calls that return DL = 0 or DL = 1
respectively.
Î
Forced FDD
Allows a hard disk image to be connected as a
floppy image. This option works only for drives
formatted with FAT12, FAT16 or FAT32.
Î
Hard Disk
Allows the USB device to be emulated as hard disk
responding to INT13h calls that return DL values of
80h or above.
Î
CDROM
Assumes the CD-ROM is formatted as bootable
media. All the devices that support block sizes
greater than 512 bytes can only be booted using this
option.