IEI Technology AFL-***-9103 Скачать руководство пользователя страница 83

Страница: 83 / 203

AFL-xxx-9103 Panel PC

Page 65

4.1 System Maintenance Introduction

If the components of the AFL-xxx-9103 fail they must be replaced, such as the wireless

LAN module or the motherboard. Please contact the system reseller or vendor to

purchase the replacement parts. Back cover removal instructions and jumper settings for

the AFL-xxx-9103 are described below.

4.2 Motherboard Replacement

A user cannot replace a motherboard. If the motherboard fails it must be shipped back to

IEI to be replaced. If the system motherboard has failed, please contact the system vendor,

reseller or an IEI sales person directly.

4.3 Internal Aluminum Cover Removal

WARNING!

Before removing the back cover, make sure the power if off. Failing to

do so may lead to severe damage of AFL-xxx-9103 series and injury to

the body.

WARNING!

Please take antistatic precautions when working with the internal

components. The interior of the AFL-xxx-9103 contains very sensitive

electronic components. These components are easily damaged by

electrostatic discharge (ESD). Before working with the internal

components make sure all the anti-static precautions described earlier

have been observed.

To replace any of the following components,

Motherboard

Содержание AFL-***-9103












































































































































































































Результаты поиска

Содержание AFL-***-9103

Отзывы:

IEI Technology AFL-***-9103, Руководство пользователя, Страница: 83 / 203

Результаты поиска

Содержание AFL-***-9103

Отзывы: