IEI Technology AFL-***-9103 Скачать руководство пользователя страница 102

Страница: 102 / 203

AFL-xxx-9103 Panel PC

Page 84

The

IDE Configuration

menu (

BIOS Menu 4

) allows changes to the configurations for the

IDE devices installed in the system. If an IDE device is detected, and one of the above

listed four BIOS configuration options are selected, the IDE configuration options shown in

Section 5.3.2.1

appear.

5.3.2.1 IDE Master, IDE Slave

Use the

IDE Master

and

IDE Slave

configuration menu (BIOS Menu 5) to view both

primary and secondary IDE device details and configure the IDE devices connected to the

system.

BIOS Menu 5: IDE Master and IDE Slave Configuration

Auto-Detected Drive Parameters

The “grayed-out” items in the left frame are IDE disk drive parameters automatically

detected from the firmware of the selected IDE disk drive. The drive parameters are listed

as follows:

Device

: Lists the device type (e.g. hard disk, CD-ROM etc.)

Содержание AFL-***-9103












































































































































































































Результаты поиска

Содержание AFL-***-9103

Отзывы:

IEI Technology AFL-***-9103, Руководство пользователя, Страница: 102 / 203

Результаты поиска

Содержание AFL-***-9103

Отзывы: