IEI Technology AFL-057A-Z510, Руководство пользователя

Страница: 34 / 122

AFL-057A-Z510/Z530 Panel PC
Page 23
Figure 3-7: Panel Opening
Step 3:
Slide the flat panel PC through the hole until the aluminum frame is flush against
the panel.
Step 4:
Insert the panel mounting clamps into the pre-formed holes along the edges of
the chassis, behind the aluminum frame. There are a total of 4 panel mounting
clamps on the AFL-057A-Z510/Z530.
Step 5:
Tighten the screws that pass through the panel mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the panel (
Figure 3-8
).