background image

Instruction Manual

5

Shelving Installation

•  Securely insert shelf clips into pilasters

•  Shelf clips should be level so shelf lays fl at

• 

Place shelf on shelf clips

FEATURES

  Designed with an elegant shape and quick refrigeration speed, this commercial-grade product is an ideal choice for 

shopping malls, supermarkets, hotels, etc.

  Transparent glass doors are built with hollow, toughened glass that provides a high level of heat insulation.  Clear 

doors allow for high product visibility.

  The forced air system allows for fast cooling speeds, which helps maintain a consistent temperature. 

  Adjustable shelves allow for a wide variety of products to be stocked.

  A built-in lock offers the ability to secure products. 

  The refrigeration unit is designed for easy access, allowing for fast and simple repairs.

  This equipment is intended for storage and display of non-hazardous packaged product.

 

      CAUTION FLAMMABLE REFRIGERANT

•  DANGER – Risk Of Fire Or Explosion. Flammable Refrigerant Used. To Be Repaired Only By Trained Service 

Personnel. Do Not Puncture Refrigerant Tubing.

•  CAUTION – Risk Of Fire Or Explosion. Flammable Refrigerant Used. Consult Repair Manual/Owner’s Guide 

Before Attempting To Install or Service This Product. All Safety Precautions Must be Followed.

•  CAUTION – Risk Of Fire Or Explosion. Dispose Of Properly In Accordance With Federal Or Local Regulations. 

Flammable Refrigerant Used.

•  CAUTION – Risk Of Fire Or Explosion Due To Puncture Of Refrigerant Tubing; Follow Handling Instructions 

Carefully. Flammable Refrigerant Used.

INSTRUCTIONS

Ambient Environment

  Place cooler on an even surface to reduce vibration and noise.

  To transport, do not tilt the cooler beyond a 45 degree angle.

  Do not place cooler in direct sunlight or near any heat sources.

  Do not place cooler in environment temperatures that exceed 109°F.

  Do not place cooler in below normal temperatures.

  Do not place cooler in extreme humid environments, this may cause components to rust.

  Do not place cooler near constant running or splattering water, this may cause immediate damage to refrigeration 

system.

  Must allow at least 4” between rear of cooler and wall for proper ventilation and heat dissipation of cooler.

  Do not place furniture or other articles with sharp edges near the cooler in order to prevent damage to the glass door.

DANGER –

 Risk Of Fire Or Explosion. Flammable Refrigerant Used. To Be 

Repaired By Trained Service Personnel Only. Do Not Puncture Refrigerant Tubing.

CAUTION –

 Risk Of Fire Or Explosion. Flammable Refrigerant Used. Consult 

Repair Manual/Owner’s Guide Before Attempting To Service This Product. All 

Safety Precautions Must be Followed.

CAUTION –

 Risk Of Fire Or Explosion. Dispose Of Property In Accordance With 

Federal Or Local Regulations. Flammable Refrigerant Used.

CAUTION –

 Risk Of Fire Or Explosion Due To Puncture Of Refrigerant Tubing; 

Follow Handling Instructions Carefully. Flammable Refrigerant Used.

CAUTION FLAMMABLE - R600a Refrigerant

DANGER - 

Risque d'incendie ou d'explosion. Réfrigérant inflammable utilisé. 

Pour être réparé que par un personnel de maintenance qualifié. Ne pas percer 

réfrigérant Tubing.

ATTENTION - 

Risque d'incendie ou d'explosion. Réfrigérant inflammable utilisé. 

Consultez manuel / guide de l 'utilisateur de réparation avant de tenter de 

réparer ce produit. Toutes les précautions de sécurité doivent être respectées.

ATTENTION - 

Risque d'incendie ou d'explosion. Aliéner des biens conformé-

ment à la réglementation fédérales ou locales. Réfrigérant inflammable utilisé.

ATTENTION - 

Risque d'incendie ou une explosion due à la perforation de 

tuyaux de réfrigérant; suivre les instructions de manipulation avec précaution. 

Réfrigérant inflammable utilisé.

PRUDENCE INFLAMMABLE - R600a Réfrigérant

80°F

Содержание G-10F





















Отзывы: