iDuck Bluetooth Speaker Model no. AD001
General Specifications
‧
Bluetooth includes profiles: A2DP, AVRCP, HFP, HSP
‧
Advanced Audio Distribution Profile (A2DP) for wireless music streaming
‧
Audio Video Remote Control Profile (AVRCP) for wireless audio
and video playback control
‧
Hands-free Audio (HFP) and Headset Profiles (HSP) for hands-free
calling capability
‧
Range up to 33FT (10M)
‧
Waterproof
IPX-6
LED Indicator
There is an LED light iDuck Bluetooth Speaker. Below is what the LED’s various displays indicate.
LED Off – Power OFF
BLUE – Power ON
Flashing BLUE/RED – Pairing mode
Installing battery
1.
Unscrew two battery door screws.
2.
Install 3 x AAA battery (Not included) in correct polarity.
3. Replace the battery door.
Pairing with Bluetooth Device (iPhone, iPad or Android Phone)
iDuck Bluetooth Speaker can be connected wirelessly via Bluetooth to your Bluetooth Device (iPhone or Android Phone).
It features a built-in mic for hands-free calling and can be used for playback of your music library.
1.
Put iDuck Bluetooth Speaker into pairing mode .Press and hold down the “MODE” button of Iduck Bluetooth Speaker for 6
seconds until the LED light starts blinking red and blue. This indicates that it is in pairing mode.
2.
Turn on the Bluetooth function of your device or phone.
3. Select
“APPDUCK”
on
your phone for pairing
4.
You will see “connected” on your device or phone.
Note:
After pairing, iDuck Bluetooth Speaker will also
“
auto-connect” with compatible devices that auto-search and re-connect with
their last connecting device if disconnection should occur.
Note:
iDuck Bluetooth Speaker will auto off automatically after 5 minutes when it does not detect any paired device.
Reconnection in Event of Bluetooth Disconnection
If by any reason your device and iDuck Bluetooth Speaker are disconnected, such as out of connection distance or powering off, they
can be re-connected by:
1. Turn the power on of iDuck Bluetooth Speaker by hold the MODE button for 3 seconds. The LED will stay blinking on blue.
2.
Short pressing the MODE button on iDuck Bluetooth Speaker.
