background image

 

 

 

 
Subject to change without prior notice 

Version 01 

Copyright © 2022 iDTRONIC GmbH 

2022-04-11 / MB 

ID IDENT 4000 User Manual EN v01.docx 

Page 3 of 18

 

 

Disclaimer 

Before using the product, please read all the contents in this Product Manual carefully to ensure the 
safe and effective use of the product. Do not disassemble the product or tear up the seal on the 
device by yourself, or iDTRONIC will not be responsible for the warranty or replacement of the 
product. 

The pictures in this manual are for reference only. If any individual pictures do not match the actual 
product, the actual product shall prevail. For the upgrade and update of this product, iDTRONIC 
reserves the right to modify the document at any time without notice. 

Use of this product is at the user's own risk. To the maximum extent permitted by applicable law, 
damages and risks arising from the use or inability to use this product, including but not limited to 
direct or indirect personal damage, loss of commercial profits, iDTRONIC. will not bear any 
responsibility for trade interruption, loss of business information or any other economic loss. 

All rights of interpretation and modification of this manual belong to iDTRONIC 

 

 

Содержание ID IDENT 4000



















Отзывы: