iDTRONIC BLUEBOX Panel Reader HF NFC, Руководство пользователя

Страница: 11 / 36

BLUEBOX Panel Reader Page 11 of 36
Parameter Description
Serial2
USB Virtual COM communication settings.
• High nibble: stop bits:
o
0x1: 1 bits
o
0x2: 2 bits
• Low nibble: parity:
o
0x0: None
o
0x1: Even
o
0x2: Odd
Hold Time
Reading management hold time:
• Decimal 0 … 99 for time in seconds (0 … 99 seconds)
Filter Time
Reading management filter time:
• Decimal 0 … 99 for time in seconds (0 … 99 seconds)
• Decimal 100 … 199 for time in minutes (0 … 99 minutes)
Flags
Flags. Single bits are dedicated to disable (0 value) or enable (1 value) functions:
Bit Description
Bit 7 Not used
Bit 6 Not used
Bit 5 Not used
Bit 4 Not used
Bit 3 ‘Spontaneous’ mode
Bit 2 Not used
Bit 1 Not used
Bit 0 ‘Continuous’ mode (0=enabled, 1=disabled).
3.2 Configuration Parameters
This section provides details on the configurable operational parameters of the
BLUEBOX .
3.2.1 USB HID Keyboard Emulation
This section provides details on the configurable USB HID keyboard emulation
parameters of the
BLUEBOX.
Parameter Description Range Default
Intrachar Time
The time between characters.
Note that this parameter become effective
only after a reboot of the reader.
0 … 990 ms in
10 ms step
20 ms