IDTECK Star RF30, Руководство пользователя

Страница: 7 / 12

7
9. Operation
9-1. Once power is applied, you should hear three beeping sounds and LED changes color to
red-green-red indicating that the reader is in standby mode after a successful initialization and
diagnostics.
9-2. Present proximity card to the reader until you hear the beeping sound and see the LED
changes color to Green. The reader will send the RF card data to the controller then the LED
will change color to Red again for the next reading.
9-3. LED Control:
To change the LED colors, you may connect the LED Control Input (Yellow wire) to ground
and the Green LED will turn on indicating that the reader is in standby mode.
Present proximity card and the LED will change color to Red then Green again for the next
reading.
9-4. Beeper Control:
In normal operation, the reader generates one beep when it reads a proximity card, however
additional beeps can be generated to improve indication for access status (granted or denied)
by forcing the beeper control input (Blue wire) to system ground level. The beeper will remain
on as long as the Blue wire is connected to system ground.