IDTECK Star Finger007, Руководство пользователя

Страница: 86 / 103

Setting Changes p.79
DUAL FIN
GER
Number of Templates and Fingers Authentication Succe
ss Ratio
Recommended Authentica
tion Mode
NOT USE
2 Storage Templates for a single fi
nger.
High Identification Mode
USE
1 Storage Template each for 2 diff
erent fingers.
Low Verification Mode
4.11 ADAPTIVE MODE
The Adaptive Mode is a feature that improves the quality of fingerprint images in the authe
ntication process, guaranteeing a higher likelihood of successful authentication. However, t
he authentication process may take longer with this feature on.
To enable or disable the Adaptive Mode, press <ENT> and press <4> or <6> to select “ENABL
E” or “DISABLE” and press <ENT> to confirm.
4.12 FP STATUS
FP Status is a special feature designed for special environments where the fingers of most e
mployees might be too dry or wet. If you set the FP Status setting to dry or wet, the FINGER
007 will adjust the fingerprint images according to the environment to improve the authenti
cation rate.
To change the setting, press <ENT> and press <4> or <6> to select “NORMAL”, “DRY” or “WE
T” and press <ENT> to confirm.
4.13 HIGH SECURITY 설정