IDTECK Star Finger007, Руководство пользователя

Страница: 22 / 103

Product Overview p.15
Duress Alarm
In the event of duress, you can enter the 2Digit Duress Password and press <ENT> and
open the door using general process. If your access is granted, the door will be opene
d as usual but duress output will be generated and an alarm event will be sent to the
PC.
1: N Authentication (Identification Mode)
You can gain access using the fingerprint authentication alone without using the RF C
ard or PIN. This feature can be enabled in 9.Identification of “SETUP MODE F4”. In the
Identification Mode, the security level gets higher automatically, FRR (False Rejection
Ratio) as well, but FAR (False Accept Ratio) gets lower, which may result in a lower re
cognition rate. With an optional Auto Touch Sensor, the FINGER007 can automaticall
y detect the approach of the finger, but if your FINGER007 does not have an Auto To
uch Sensor, you will be required to press <ENT> prior to placing your finger on the sen
sor.
Adaptive Mode
If the Adaptive Mode is enabled, the fingerprint image is automatically adapted for be
tter recognition results. This mode can be enabled in 11.Adaptive of “SETUP MENU F1”
. While this feature improves the recognition success rate, the authentication process
may take longer.
Weigand Output Function
You can use a Weigand Output Function in the "SETUP MODE F2".
2 Product Description