IDTECK SRK101V, Руководство пользователя

Страница: 14 / 21

Initialization
4
p.11
1 Basic operations
1.1 Initial state (when the power is supplied)
When you apply power to the product, it will sound beep three times before entering
Standby with the red indicator turned on.
1.2 Using the card
Present the card to the product until you hear a beep and the green indicator turns on.
The reader keeps the green indicator turned on while transferring the card data to the
controller. When it is done, the green indicator turns off and for receiving the next card, the
red indicator stays ON.
1.3 Using the keypad
Hold down the keypad until you hear a beep. The reader transfers the keypad data to the
controller.
As soon as you press the keypad, the orange indicator turns on, followed by the reader
transferring the keypad data to the controller. Then, only the red indicator turns on.
1.4 LED Control
You can control both green and orange indicators at will.
To control the green indicator, connect the green-indicator control line (yellow) to NO of
the controller relay output, and connect COM to GND. Set I/O of the controller; now you
can control turning on/off the indicator.