IDTECK LX007 Скачать руководство пользователя страница 12

Страница: 12 / 107

General

p.4

The

LX007 / LX007SR

is ideal to use for Single Door Access Control and Time & Attendance.

The

LX007 / LX007SR

has 4 input ports, 2 Form-C relay outputs, 2 TTL outputs, an RS232/R

S485 communication port and an optional TCP/IP communication port to meet various cust

omer requirements.

This user-friendly device allows you to register up to 1,000 Fingerprint Users (Optional 2,000

/4,000 Fingerprint Users) and can store up to 10,000 IDs and 20,000 event transactions. All

events can be uploaded and saved to the database of the host PC and the software can crea

te a report in MS-Excel, HTML and Text format files for Time & Attendance management pu

rposes.

The

LX007 / LX007SR

has a built-in Fingerprint Module, a proximity card reader with IDC 26

bit Wiegand format and a 24-key keypad (10 numeric keys, 2 control keys and 12 function k

eys) for a wide range of applications. The

LX007 / LX007SR

controls access of users with an

y selected combination of fingerprint, Proximity Card/PIN and/or password. The

LX007 / LX

007SR

has 4 external input ports to be connected to an exit button, a motion detector, a do

or contact sensor and an existing alarm system to prevent unauthorized access.

The

LX007 / LX007SR

has 2 relay outputs to control a door lock and an alarm relay that is u

sed to warn errors. The graphic LCD supports multiple languages so that the unit can be ope

rated anywhere in the world.

All system settings can be configured using the front keypad or via the Windows-based soft

ware. The

LX007 / LX007SR

is a cost-effective biometrics system that can be used stand-alo

ne or networked. The dual tamper switches prevent unauthorized access.

Содержание LX007












































































































Результаты поиска

Содержание LX007

Отзывы:

IDTECK LX007, Руководство пользователя, Страница: 12 / 107

Результаты поиска

Содержание LX007

Отзывы: