IDTECK iTDC, Руководство пользователя

Страница: 74 / 146

BASIC SETTING
iTDC
p.67
7 ID REGISTRATION
You can register the User ID into the iTDC. Select [SETUP MENU F3] -> [ID REG.] then follow
the steps below: The Master ID for iTDC-SR is 10 digits number (Default setting
“0000000000”).
7.1 Reference for LCD Display
ID [________]
ID number consists of 3-digits Facility code from 000 to 255 and 5-digits ID number
from 00000 to 65535 so that the 8-digits ID number cannot exceed 25565535. If you
don’t know the ID number of the proximity cards then select [SETUP MENU F4] -> [6.
READER TEST] then present the card to the reader to display the ID number. Enter
8-digits ID number then press <ENT> key in the ID [________] field. (ID number of
iTDC-SR has 10-digit number and its range is from 0000000000 to 4294967295)
PW [____]
PW is the password which can be used to access the doors where you install a
Proximity and Keypad Reader and set-up the RF + Password operating mode. But if
you use it as RF only mode(use RF Card only), you need to enter password on
registration but don’t have to enter the password when you enter the door.