![IDTECH Vivopay Neo 2 Скачать руководство пользователя страница 377](http://html.mh-extra.com/html/idtech/vivopay-neo-2/vivopay-neo-2_developers-manual_618786377.webp)
NEO 2 Interface Developer’s Guide
Copyright © 2019, International Technologies & Systems Corporation. All rights reserved.
377
8.30.2.
Get USB Power Mode Suspend Configuration (F0-09)
This command is used to read out USB Power Mode Suspend Configuration
Command Frame
Byte 0-9
Byte 10
Byte 11
Byte 12
Byte 13
Byte 14
Byte 15
Header Tag &
Protocol
Version
Command
Sub-
Command
Data Length
(MSB)
Data Length
(LSB)
CRC (LSB)
CRC (MSB)
ViVOtech2\0
F0h
09h
00h
00h
Response Frame
Byte 0-9
Byte 10
Byte 11
Byte 12 Byte 13
Byte 14
Byte 15
Byte 16
Header Tag &
Protocol
Version
Command
Status Code
Data
Length
(MSB)
Data
Length
(LSB)
Data
CRC (MSB)
CRC (LSB)
ViVOtech2\0
F0h
See Status
Code Table
00h
01h
USB Power
Mode
Suspend
Configuration
Data:
•
00h: OFF (default)
•
01h: ON
8.31.
Miscellaneous NEO II Platform Commands
8.31.1.
Removal Tamper Configuration (04-22)
Use this command to enable removal tamper detection,
or
to get tamper status.
NOTE:
Only TriMag IV (ID TECH ASIC) physical tamper features are used for this functionality.
Command Frame
Byte 0-9
Byte 10
Byte 11
Byte 12
Byte 13
Byte 14
Byte 15
Byte 16
Header Tag
& Protocol
Version
Command
Sub-
Command
Data Length
(MSB)
Data
Length
(LSB)
Data
CRC
(LSB)
CRC
(MSB)
ViVOtech2\0
04h
22h
00h
01h
01h: Enable
tamper
02h: Get tamper
status
Varies
Varies