IDT DBP 7+4, Руководство пользователя

Страница: 33 / 93

Configuration the connections
1. Direct connection
Normally there is nothing to configure this connection. During the first launch of
the application the software will display the following dialogue box:
Choose the COM Port you want to connect the DBP 7+4 to, and click « OK ». The
COM Port selected will be memorised for the next connection.
When you are connected to another COM Port or you want to change the type of
connection click the same icon and you will be asked which COM Port you wish to
use.
Choose « direct » to select another COM Port or change the type of connection as
follows or you will find yourself back in the COM Port selection box.
33