IDT DBP 7+4, Руководство пользователя

Страница: 14 / 93

II-1 - Connections
XLR audio in / Out
The I/Os of the DBP 7+4 are linked by" XLR 3 Pin " connectors
The wiring is the following :
Pin number 1 = Ground
Pin number 2 = Hot Point
Pin number 3 = Cold Point
„
XLR Input
As with any professional audio unit the inputs are female so you need to use a
male XLR to bring the audio into the
DBP 7+4 .
The DBP 7+4 has a balanced electronic input.
IMPORTANT : the input can receive balanced and imbalanced signals.
„
XLR Output
The audio output connectors are male so you need female XLRs to take the
signal out of the DBP 7+4 .
As for the input the DBP 7+4 has a balanced electronic output.
IMPORTANT : the output is protected against unbalancing (cold point to
ground), so if need be you can use this type of link.
14